Home › Bollards and Physical Barriers
We install bollards and physical barriers in Johns Creek, GA to protect people, buildings, and equipment from vehicle impact. Options include steel pipe bollards, decorative covers, and barrier posts for parking lots, storefronts, and loading areas. Properly placed barriers help control traffic and safeguard vulnerable assets without blocking pedestrian flow.
Legendary Fence Company Johns Creek provides professional bollard installation throughout Johns Creek, GA, Georgia and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 770-284-3687 or request your free quote.
Bollard Installation and Physical Barriers for Johns Creek Properties
Bollards and physical barriers are about controlling how vehicles move on and off your property, not just adding metal posts in the ground. At Legendary Fence Company Johns Creek, we focus on how people and cars actually use your space in Johns Creek, then design a barrier system that fits the traffic pattern, the slope of your lot, and existing structures.
In Johns Creek, we commonly install bollards at retail storefronts along Medlock Bridge Road, small office complexes, churches, and neighborhood amenities like HOA pools and tennis courts. Many sites were built 15 to 30 years ago, so underground utilities and aging concrete are real factors. Before we ever drill a hole, we look for irrigation lines, electrical runs for landscape lighting, and any existing cracks in your sidewalks or curbs.
A typical project starts with a walkthrough. We stand where drivers actually turn in, park, and exit. We look at turning radiuses, sight lines, and how delivery trucks approach. Then we discuss how much impact protection you truly need. Protecting a gas meter behind a restaurant requires different bollards than guiding golf carts at a country club or keeping cars off a greenway trail entrance.
Physical barriers are not limited to bollards. We also install low guardrails, heavy-duty gates, and integrated fence-and-bollard systems, so pedestrians move freely but vehicles stay where they belong. The goal is to solve a specific risk on your property, not to overbuild something that makes access frustrating for visitors.
Types of Bollards and Barriers We Install
Legendary Fence Company Johns Creek offers several bollard types, each suited to a different level of protection and appearance. For light duty applications, such as protecting landscaping islands or guiding parking along cul-de-sacs, we often use surface-mounted steel bollards with base plates anchored into existing concrete. These are quicker to install and cost less because they do not require deep excavation.
For storefront protection and utility protection, we usually recommend embedded steel pipe bollards. These are heavy-wall steel pipes set into a drilled hole and filled with concrete. We typically set them 24 to 48 inches deep depending on soil conditions in your part of Johns Creek and the impact rating you need. On commercial sites with delivery truck traffic, we may tie bollard footings into a continuous concrete grade beam for extra strength.
If your priority is appearance, we can add bollard covers. These include powder-coated steel sleeves, decorative cast aluminum covers, or HDPE plastic sleeves in safety yellow, black, or custom colors. Decorative covers are popular in mixed-use developments and HOA entrances because they blend with brick, stone, and upgraded landscaping.
For larger physical barriers, we install steel guardrail sections, heavy steel pipe rails, and custom welded barrier systems that pair with existing fences. In tight parking areas around older shopping centers, we sometimes use low-height barriers that allow doors to open but keep bumpers from crossing the line and hitting walkways. In residential contexts, like large driveways near steep grades, we can integrate bollards with aluminum or steel fencing so the system looks like it was part of the original build.
How Our Bollard Installation Process Works
A successful bollard installation in Johns Creek starts with accurate layout and knowing what is under the pavement. After the initial site visit, Legendary Fence Company Johns Creek arranges utility location. For commercial work we use 811 plus private locating as needed, since many shopping centers and office parks have unmarked irrigation or low-voltage lines that are not in the public records.
Once utilities are cleared, we mark each bollard centerline with paint and verify alignment from multiple angles. We consider door swing, ADA paths, and vehicle overhang so bollards do not create new hazards. For drilled-in installations, we use a core drill or rotary hammer to cut through existing concrete or asphalt. In older Johns Creek plazas, pavements can be thinner or already cracked, so we may enlarge the footing or remove and replace a section of slab to avoid future failures.
We then set the bollard posts into the holes, check them for plumb, and secure them with high-strength concrete. Typically, we use a minimum 3,000 psi mix and vibrate the concrete around the post to remove voids. For impact-rated work, we extend the concrete footing below the frost line and sometimes add rebar cages or cross pins through the pipe to lock the bollard in.
For surface-mounted or base-plate bollards, we drill and install mechanical or epoxy anchors. We test torque and verify that the substrate is not spalled or brittle. If the concrete is in poor condition, we may recommend cutting and recasting a pad so the anchors hold over time. After the posts are set, we cap, sleeve, or paint them, then clean the work area so you can reopen your parking or walkway quickly.
What Affects Cost and Timeline in Johns Creek
The cost of bollard installation depends on three main factors: the type and rating of the bollards, the site conditions, and how much prep or repair work is needed. Simple guiding bollards in good concrete pads are the most economical. High impact or crash-rated bollards that require engineered footings, deeper drilling, or tying into structural slabs cost more per unit.
In Johns Creek, site conditions vary between newer developments with thick, clean concrete and older plazas where patches of asphalt and concrete overlap. If we find delaminated pavement, we may need to sawcut and pour new concrete around the bollard locations. This adds material and labor but prevents future settling and loose posts. Sloped drive aisles, common in hilly parts of the city, also affect cost because we may need to step the bollards or adjust footing depth to keep tops level.
Underground utilities can change the design. If there is a shallow gas line or communication conduit where you want a bollard, we might shift the layout or change from a deep-set embedded bollard to a surface-mounted design with a reinforced base plate. These adjustments protect the utilities and avoid costly rerouting.
Timeline is usually a few days from layout to completion for typical projects. However, if the job requires permits, traffic control on busy entrances, or coordination with property management companies, planning can take longer. Legendary Fence Company Johns Creek is clear about these factors upfront so you know whether your project will be a quick install or a phased job that works around your operating hours.
Local Considerations and Choosing the Right Installer
Bollards and physical barriers in Johns Creek are often driven by insurance requirements, city code, or corporate safety policies. For example, some national retailers require a specific spacing and distance from glass storefronts to reduce vehicle intrusion risk. We coordinate bollard placement to respect local ADA requirements, fire lane markings, and emergency access so you do not create compliance issues while trying to improve safety.
Weather is relatively mild in Johns Creek, but humidity and summer sun are tough on exposed steel. We recommend hot-dip galvanized posts under any painted finish for long-term corrosion resistance. For high-visibility locations, we often use UV-resistant sleeves instead of relying on paint alone. This reduces future maintenance and keeps your barriers looking consistent even after years of sun and rain.
When you hire a contractor for bollard installation, look beyond basic fencing skills. You want a team comfortable with concrete work, core drilling, and reading site plans. Legendary Fence Company Johns Creek regularly works with property managers, general contractors, and small business owners, and we document post spacing, footing size, and materials used so you have a record for insurers and future projects.
Before we quote a job, we ask how your site is used at its busiest time of day. This shapes the design more than any catalog picture. A medical office with frequent drop offs needs different bollard placement than a warehouse receiving semi trucks. We design so pedestrians feel natural walking through the space, while vehicles are quietly guided by the barriers, not trapped by them.
